SLIP2000 Carbon Killer Gun Cleaner 15 Oz. Jar

(16 reviews)
Current Stock:

SLIP2000 Carbon Killer Gun Cleaner 15 Oz. Jar

SLiP2000™ Carbon Killer Is Here!

Along with the new name comes new packaging. All glass and metal have been replaced with durable plastic. These user friendly packages can also be used as storage containers. The time consuming and labor intensive chore of cleaning your pistols, automatic and semi-automatic weapons is a thing of the past with Carbon Killer.

SLIP 2000's™ Carbon Killer was designed with your health and safety in mind. Unlike other products, this product is non-flammable, non-hazardous and it is biodegradable. Carbon Killer provides you with a safe effective way to clean carbon, lead and plastic wad fouling.

SLIP 2000's™ Carbon Killer does not stop working and can be used again and again. If stored properly one jar will provide a user several cleanings and will last for several months.

Can be used on
All revolvers, pistols, 37mm and 40mm Gas Guns, automatic and semi-automatic weapons including: M-16, AR-15, MP-5, and all Machine Guns like the AK-47 and 249-SAW.

Flash suppressors, silencers and cans
Dissolves burnt on carbon and will help flush powder and carbon residue out of all cans and suppressors.

Dissolves burnt on carbon and will help flush powder and carbon residue off of your compensator.

Use it to clean your bore
Carbon Killer works fantastic as a bore cleaner. Use it to remove all of the carbon, lead and plastic that has built up in your bore.

Simple to use

  • Soak Parts:
    For best results, on parts that are not cleaned on regular bases, completely submerse parts to be cleaned and allow to soak for 5 to 15 minutes. Remove parts and wipe, brush or rinse clean. It's that easy. Depending on the frequency of cleaning or type of ammo used a second soaking may be required.
  • Wipe Parts:
    For larger parts that will not fit into jar, soak a nylon brush or rag in Carbon Killer, apply to area that needs to be cleaned and allow product to set for 2 to 5 minutes. When ready to clean, saturate brush or rag with Carbon Killer again and wipe or brush away carbon. Parts may also be rinsed clean under hot water.
  • After cleaning, always re-apply SLiP2000™ Lubricant to metal surfaces and allow to penetrate pores of metal. SLiP2000™ will form a barrier and help keep carbon, lead and plastic from sticking. Your next cleaning will take half the time.

Other uses
Shotguns - Pistols - Revolvers - Black powder guns - Automatic weapons - Silencers - Flash Suppressors - Compensators

May be used in chambers and barrels as a bore cleaner. Apply to cylinder faces, bolt faces and any other hard to clean areas and allow to soak for 2 to 10 minutes. Carbon, lead, copper, plastic and burnt powder will wipe clean with a nylon brush. Next cleaning will be much easier with SLIP 2000™ Lubricant/Cleaner. Users will actually be able to wipe carbon and plastic wad fouling away.

For best results, on parts that are not cleaned on regular bases, completely submerse parts to be cleaned and allow to soak for 5 to 15 minutes. Remove parts and wipe, brush or rinse clean.



  • 3
    Meh. Its ok. Didnt work like it states

    Posted by Unknown on 14th May 2020

    I was able to remove carbon build up from my bolt. It did not just come off like it claims. I soaked it for the recommended time and nothing. Had to use a wire brush and razor blade and resoak many times. I saw all these great reviews on skd and jumped the gun. After checking other sites and reviews i see other people complain about similar problems. I haven’t tried a lot of different products so hard to compare. I would say average and would try another product before ever buying this again. Its also a pain in the ass to use. Make sure you have a hand full of things to clean so your not wasting your time or 20$ bottle.

  • 5
    Product arrived as described

    Posted by Brandon Williams on 19th Apr 2020

    Haven't had an opportunity to try it yet but bought it because of an instructional video. Best offer I could find.

  • 5
    great product

    Posted by Nick G on 25th Jun 2014

    I have used countless gun cleaning products over the years, This is by far the best product I have. found. It was recommended to me by a good friend and former police officer. I would recommend this products others. You can clean barrels or soak parts in it and the dirt and carbon just falls off. You can pour it back into bottle and re use it again.

  • 5
    slip 200 cleaner

    Posted by LAPD Motor Cop on 16th Jun 2013

    After sooting my Police Patrol rifle, I Place my bolt carrier group, bolt, firing pin and charging handle in a large cup, fill it with the Carbon Killer and let it sit while I tend to the rest of the rifle. So clean, you could eat off it.

  • 5
    Makes the clean up easy

    Posted by Fred on 20th May 2013

    SLIP2000 is the way to go for carbon clean up. Eliminates a lot of elbow grease. It really does an effective job of dissolving the carbon on parts and barrels.

  • 5
    Great Buy!

    Posted by Unknown on 29th Jan 2013

    Excellent value for the money. It cleans my weapon fast and easily.

  • 5
    SLIP2000 Carbon Killer Gun Cleaner 16 Oz. Jar

    Posted by Unknown on 14th Sep 2012

    Works great, Earth friendly.

  • 5
    Great carbon remover !

    Posted by Keith Pearce on 16th Aug 2012

    Soak bolts, flash hiders and other build up areas, carbon deposits melt away.

  • 5
    Excellent cleaner

    Posted by Unknown on 2nd Aug 2012

    Works very well for all the trouble spots and build up I get from shooting suppressed. Also I like the smell...