A complete offset optic mount requires both a base and one optic plate.
This product listing is only for purchasing spare plates.
Standard height (for 1.5" to 1.8" scope mounts):
- Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III, Crimson Trace CTS 1250/1300 and CT RAD/RAD Pro
- Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Plate 3: C-More, Vortex Razor, SIG Romeo 3
- Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero, Crimson Trace CT RAD Micro/Micro Pro
- Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530
- Plate 6: Aimpoint Acro, Steiner MPS
- Plate 13: Holosun 509T
- Plate 15: SIG Romeo 1 and Romeo 1 Pro
- Plate 18: Holosun 407K, 507K
- Plate 21: Trijicon RMRcc
Tall height (1.9" to 2.2" scope mounts):
- Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III, Crimson Trace CTS 1250/1300 and CT RAD/RAD Pro
- Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero, Crimson Trace CT RAD Micro/Micro Pro
- Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530
- Plate 12: Aimpoint Acro, Steiner MPS
- Plate 14: Holosun 509T
- Plate 16: SIG Romeo 1 and Romeo 1 Pro
- Plate 17: 1913 Picatinny Rail Adapter (40 degrees only, non adjustable)
- Plate 19: Holosun 407K, 507K
- Plate 20: Trijicon MRO
- Plate 22: Trijicon RMRcc
Please refer to your optic's manufacturer for correct torque values, but do not exceed 20 inch lbs on the screws that attach the optic to the plate. For instance, Aimpoint specifies just under 12 inch lbs for the Micro T1/T2.
Made in the USA.
Each mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Please refer to the instructions for torque values and mount configuration. All plates include new screws (where needed) which we highly recommend using over the OEM screws. The Leupold DPP plate 4 and 10 include extra long screws to attach the optic to the plate that require a 2.5mm Allen key.
Reviews
-
Arisaka Defense Offset optic plate
Research of similar mounting systems/angles led to this one. While it had more screw than some, they are top notch for fit and the final mount up was rock solid. With several hundred rounds down range with several gun and go training sessions, this set up is perfect for me. I have already purchased a second mount to place on another rifle with a LPVO. Fast, secure and in my mind as tough as BUIS.
-
Arisaka offset mount plate
Absolute perfection! RMR plate #2 is what I needed for my secondary red dot. Very nice that Arisaka offers different plate thickness depending on the height of your main optic to make smooth transition from main to secondary optics. Very well though out.
-
Great products by Arisaka Defense
Everything Arisaka manufactures is high quality and this is no exception. Everything is machined to precision and fits like a glove. You can bet your life on these products
-
Offset mount
Tucks under the front of a lvpo nicely. I had to run it in the 45 degree to clear the scope, but there is also the 33 degree angle. Make sure you get the proper one for your scope height.
-
Solid
Had the OG 1.5” plate and was perfect. Getting more into heads up position. This 1.9 fits the bill. Arisaka is solid. Skd perfect service. Quick delivery. Definitely recommend
-
Just what I needed.
Just received my mount with the #2 base plate. I can only say I’m truly impressed. Fit and finish were tight and clean, truly some of the best craftsmanship I have ever seen. These guys take pride in what they produce. I’m so loving the choice between 30’ and 45’ off set option. Thanks SKC for bringing us good shit!