FirstSpear Overlap Cummerbund, 6/12™, Tubes™

FirstSpear Overlap Cummerbund, 6/12™, Tubes™

Overlap cummerbund uses non-standard soft armor inserts available through First Spear

Responding to a specific request from a FS Professional User at the Tip of the Spear the Overlap Cummerbund has been designed and engineered to provide additional overlapping soft armor at the front side of the plate carrier where the Tubes™ closure system meets. The additional soft armor tucks in behind the Tubes™ allowing full opening and closing of the vest.

The body side of the Cummerbund has been modified to allow the attachment of Ragnar™ Pockets so that magazines and other items can be held in close to the body making for an even more streamlined silhouette. This feature is particularly attractive for Users trying to carry more magazines than traditional front loading of the carrier will allow, tubular assaults or working in the tight confines of a conventional vehicle.

The overlap cummerbund will integrate with a number of FirstSpear carriers including the SAPI or MBAV cut Strandhögg and Assaulter Armor Carrier. Available now in limited colors and sizes Shown with SAPI cut strandhögg and Ragnar (hook backed) pockets - Sold Separately

How to measure for your Cummerbund

*Measure your chest around the widest part (usually at nipple height) and it should correspond with your jacket size if you know it. Compare that measurement with the sizes below to select your cummerbund.

S - One Half = 19" | min=27.75" | max= 40"
M - One Half = 19.75" | min=29" | max=42.5"
L - One Half = 21" | min=32.25" | max=45"
XL - One Half = 22.5" | min=35.5" | max=49"

If you are in between 2 sizes we recommend trying the smaller of the two sizes first. These sizing suggestions are general guidelines. There are multiple variables in play that make fitting armor an imperfect process at best but this will put most people into the size they need to be. Adding PIG AFC Pontoons will reduce the size and fit while increasing comfort considerably.