ModButton Lite is a smaller, lighter-weight cousin to the original ModButton. The switch features the same momentary-only activation as the original ModButton. It also features the same high power cable and switch from ModButton but in a slightly smaller package without the integrated mount. The switch is made from injection molded plastic and fully potted to provide extra degree of protection in harsh environments and ensures a durable long lasting switch.
ModButton Lite utilizes a patented Unity Tactical design which supports power delivery needed by the next generation of high output weapon lights like Modlite. A Unity built Surefire® compatible cable lead allows ModButton Lite to be backwardly compatible with all Surefire®, Arisaka and Modlite Scout bodies as well as Surefire UE and DS00 tail caps. If constant on is a requirement we recommend using a SF DS00 tail cap which can be found here.
One problem that exists today is older legacy switches are not able to pass the current needed to run current and future generation lights. These older switch designs do not allow Modlite light heads to run at full power. Typically these switches reduce output by 15-20%. ModButton Lite utilizes an updated plug design as well as improved electronics that allow the ModButton Lite to output at full power so all the lumens and candela can be put to good use.
The package includes the switch PIC mounting rails and mounting hardware only no tail cap is supplied.
MLOK adaptor can be found here.
This is for the 4.5" variant which is what you want to buy.
Unless you have a special setup the 4.5" cable is going to be plenty even running a laser.
Made in the USA
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
The bolts were missing but I got some new ones and it works great
The modbutton is simple to mount and has a really small footprint. If a momentary only switch is what you need, then look no further. This design is truly superior to the current Surefire offerings.