Scalarworks LEAP/07

Ultra High Performance Scope Mount

Designed for shooters who want the lightest, most rigid, and most compact quick-detach scope mount possible.

LEVEL HEADED

Proprietary leveling screw helps square your scope with your mount.

LIGHT MADE RIGHT

Engineered to be the lightest QD scope mount, without compromising an ounce of strength.

STATE OF THE SMART

The LEAP/Scope incorporates two of the most efficient structures known to man. A tubular boom and an I-beam bridge, each with over-sized cross-sections, maximize rigidity and impact resistance while minimizing weight.

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

THE ONE RING

The Scalarworks® Ring was designed from the ground up to be stiffer, lighter, and easier to use than split rings.

A high-strength, precision fitted hinge ensures even pressure around your optic, without requiring the tedious and imprecise setup that split rings do.

Twin oversize CNC machined shoulder screws provide even tension and act as structural elements, making the entire ring assembly phenomenally rigid.

Each side of the Scalarworks® Ring is carefully lightened with a curvature continuous scallop that produces a very high strength-to-weight ratio.

The Scalarworks® Ring is wider than competing designs, providing more surface area to safely and securely hold your optic.

SMOOTH IS FAST

The Leap has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.

QUANTUM QUICK DETACH MECHANISM

The Scalarworks® Quantum™ Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail. By decoupling torque from vibration resistance, the Quantum™ QD mechanism is intuitive, fast, and self adjusting, all without needing an imprecise knob or obtrusive lever to keep it from shaking loose. The Quantum™ QD's recessed head is carefully designed to deflect external impacts, while letting you take the mount off in under 3 seconds, with or without gloves.

SPECIFICATIONS

30MM Scope Mount (SW0700)
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Flash Nitride
RING DIAMAETER: 30mm
CENTER HEIGHT OVER RAIL 1.57" (40mm)
CANT: 0Mil (0MOA)
OVERHANG: 50.8mm (2.0")
WEIGHT: 159.3g (5.62oz)
MADE IN USA: Lifetime Warranty

34MM Scope Mount (SW0710)
MATERIALS: 7075-T6 Aluminum + 4140H Steel
FINISHES: Type III Hard Anodizing + Flash Nitride
RING DIAMAETER: 34mm
CENTER HEIGHT OVER RAIL 1.57" (40mm)
CANT: 0Mil (0MOA)
OVERHANG: 50.8mm (2.0")
WEIGHT: 161.4g (5.70oz)
MADE IN USA: Lifetime Warranty

COMPATIBILITY

FIREARMS: Any equipped with MIL-STD-1913 Picatinny Rail (50BMG testing still pending)
OPTICS: Any scope that fits the above dimensional constraints of the scope mount.

INCLUDED

• Scalarworks® Leap™ Mount
• Scalarworks® Leap™ Leveling Screw
• Scalarworks® Leap™ Nylok® treated ring screws
• T25 Torx driver bit.
• User manual.