
HSGI COBRA 1.75" Riggers Belt w/ Interior Velcro
Sewn with the same strength and attention to detail as HSGI's standard Riggers Belt but with the quick release COBRA buckle. HSGI Cobra Rigger's Belts are constructed of 2 layers of 1.75" Type 13 webbing rated for 7000lbs. Sewn together with Bonded 138 nylon thread with 5 rows of stitching the entire length. The two layers are not only sewn together, but are laminated with an industrial strength adhesive to give more rigidity and stiffness.
The Proven Quick Release COBRA Parachute Buckles are used to secure the belt (Rated for 4000lbs). This belt is capable of handling anything you can throw at it. From holding your pants up, to emergency extraction hanging from a helicopter. This Belt is 1.75" wide.
When ordering to be worn as an inner belt for the Sure-Grip Padded Belt, order larger than the SGPB Itself.
Sizes:
32"-34" Medium
36"-38" Large
40"-42" X-Large
44"-46" 2X-Large
48"-50" 3X-Large
*HSGI's Riggers Belts are NOT Labeled or Certified for Climbing or use as Life Saving Equipment. HSGI will not be held responsible for any injuries or death for the misuse of any of our products.
Reviews
-
Riggers belt
Very high quality belt. Not too stiff that it digs in to my sides but stiff enough that my gear isn’t floppy or saggy. One thing I noticed is the most other manufacturers make their belts with hook on the main belt not loop like this one from what I’ve seen, so you will most likely have to stick with HSGI for an inner belt or belt pad but other than that this is one of the best belts on the market