This light package contains a PLHv2-light head, and a 18650 body. It also includes a single KeepPower 3500mAh 18650 battery and a XTAR MC2 charger. While lumen output with this light is similar to the Surefire® M600DF head the throw is much better suited to a rifle mounted application at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. Is is the best balance of flood and throw available.
If you're looking for the best overall output and throw this is the package you want. We also offer the same light in a shorter package with our 18350 body.
- Cool White 5700K emitter tint.
- Made and assembled in the USA.
- Drivers are fully potted and tested to withstand select fire SCAR 17 recoil.
- Lifetime guarantee.
- Approximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.
- 6061 Series Alum bezel with Mil-Spec Hard Anodizing.
- Ultra clear BOROFLOAT® lens allows 98-99% light transmittance.
- Length w/ Clicky tailcap: 5 1/2" / 140mm.
- Head Diameter: 1 3/16" / 30.16mm.
- Weight: 5.4oz (w/ tail cap and battery).
Lithium CR123 cells are not supported and if used will cause the cells to heat up and possibly explode or catch fire.
We recommend the Modlite high drain 3500mAh cells which can be found here.
Runtime is about 75 minutes with the supplied 18650 cells.
- Arisaka Momentary - eliminates accidental constant activation under stress.
- Surefire Z68 clicky.
- Surefire UE socketed tailcap - for use with remote switches.
- Surefire DS socketed tailcap - has both a remote switch port and clicky switch.
- No tailcap - in the event you already have a tailcap to use.